Value-Added Benefits |
| Standard Features |
 |
Benefits |
| 1 |
Windshield Glass - tinted, safety glass installed with rubber seal.
|
|
Reduces sunlight and glare, glass will not shatter on driver upon impact.
|
| 2 |
Hingeless Two-way Vent - can be used as an intake or an exhaust vent, positioned near the drivers legs.
|
|
Maintains better ventilation and temperature control for driver comfort.
|
| 3 |
Grille - incorporated into front hood piece, Freightliner chassis have separate grille.
|
|
Integral to the hood, made out of aluminum to last longer, can be replaced easily if damaged.
|
| 4 |
Hood - full opening aluminum lift-up hood constructed with sturdy corner castings and an integrated aluminum grille.
|
|
The aluminum hood provides cost savings because it is designed for simple and quick repair in a high damage area, the hood is easy to lift and locks in place with the hydraulic arms.
|
| 5 |
Power Source - 12 volt cigarette lighter.
|
|
Can also be used for cell phone or portable tracking.
|
| 6 |
Windshield Wipers - top mounted dual wipers with single heavy duty thermal protected motor.
|
|
Easy to maintain motor and linkage.
|
| 7 |
Sun Visor - 6" x 30" black vinyl padded visor driver side.
|
|
Adjustable for every size driver, can be positioned at various heights and angles.
|
| 8 |
Driver's Seat - premium high back bucket seat with salt and pepper cloth fabric, tilting pedestal.
|
|
Seat adjustable forward, rearward, up and down, seat fabric provides maximum comfort in all seasons, tilt pedestal allows access behind the seat.
|
| 9 |
Mirror - two mirror heads mounted on adjustable arms, right and left sides, top is a 6" x 10" flat mirror, bottom is a 6" x 6" convex mirror.
|
|
Top mirror gives a normal field of vision, bottom mirror gives a closer wide angle view, the combination allows the best possible visibility for driver safety.
|
| 10 |
Center Cab Floor - 1/8" aluminum diamond plate.
|
|
Removable for easy access to chassis transmission.
|
| 11 |
Dome Light - mounted in center of cab ceiling.
|
|
Separate switch located on instrument panel.
|
| 12 |
34.5" side doors (left and right) opening with enlarged windows - sliding doors with crank operated window, composite lower door track, top and bottom brush seals with double seal at rear edge of door, bronze striker plate with anti-theft design, key locking paddle handles.
|
|
Lower door track designed for quieter operation and will not trap dirt. Brush seals greatly reduce flow of air and dust into the cab. Striker plates are adjustable and reversible to insure positive latching year after year.
|
| 13 |
Floor - extruded aluminum interlocking floor planks, 5 1/8" grooved rear drop sill with drain holes each side, fuel sender access door in the floor.
|
|
Flat, smooth floor side-to-side and front-to-back. Interlocking planks eliminate air and water intrusion. Drop sill designed for water runoff and drainage to keep cargo dry.
|
| 14 |
Side Panels - full 1/8" (.125") thick strain hardened aluminum alloy, upper and lower side panels connects with a 5" heavy duty rub rail, riveted construction with interior side wall stiffeners.
|
|
Flat surface on the exterior for company graphics and on the interior for easy upfit. Rub rail protects side panels from scrapes and scratches.
|
| 15 |
Roof - .040 aluminum roof skin interlocked to roof to side rails, front nosing and transom. Roof bows installed on 24" centers. Steel roof bow at the "O" line between the cab and load compartment. Roof to side rails with integral drip rail running the full length of body.
|
|
Interlocking roof provides a double seal to prevent water leaks. Steel roof bows provide a secure attaching point for bulkheads. Drip rail keeps graphics on sides cleaner and keeps driver and his product dryer.
|
| 16 |
Roof Liner - 1" fiberglass insulation with .025" embossed aluminum roof liner in cab and load compartment.
|
|
Helps to maintain a consistent temperature in the vehicle.
|
| 17 |
Rear Doors - 38" two piece swing doors without glass. Key locking handle on right door and slam latches with inside release handles.
|
|
Doors seal tight to prevent air and water leaks. Designed to withstand constant use for the life of the vehicle.
|
| 18 |
Rear Bumper - 8" aluminum diamond plate bumper with protective corners (kidneys).
|
|
Durable full width bumper that is resistant to rust, protects rear of vehicle from damage and provides a solid step surface for entering and exiting the vehicle.
|
| 19 |
Mud Flaps - 20" x 24" mud flaps with logo.
|
|
Protects rear of vehicle from road splash and debris.
|
| 20 |
Fuel Fill - fuel fill access on left lower side.
|
|
Utilizes chassis manufacturer supplied parts for ease of service.
|
| 21 |
Lights - ICC lights at roof line front and rear, side marker lights front and rear, front park/turn lights, rear stop/tail/turn combination lights, two back-up lights and license plate light. OEM supplied headlights.
|
|
Meets or exceeds all FMVSS and CMVSS standards.
|
| 22 |
Electrical - plug-together automotive wiring harness with machine crimped connectors. All wiring installed in a protective loom.
|
|
The wiring harness reduces maintenance, the wiring loom prevents abrasion.
|
| 23 |
48,00 BTU Heater
|
|
Higher output than competitions 40,000 BTU for great driver comfort.
|
| 24 |
Seat Pedestal Bolted to Chassis Frame
|
|
Competition bolts to cab floor. Morgan Olson's design is Safer and more durable design.
|
